How long has it been since you really gave your bathtub a good scrubbing? Probably it has been some time since you took your test. We all know how to clean our tubs after we take a shower, but that is far beyond how bathtub cleaning is done. Unless the bathtub cleaning is done regularly, the soap scum accumulates, mildew grows in accessible areas, and the stains are difficult and difficult to clean. The bathtub cleaning not only leaves the bathroom clean, but also healthier for your family. Well, are you now prepared to know how to professionally clean bathtubs? Now it is time to arrive at the final step-by-step.
1. Get All the Right Materials
The initial stage is preparation. Bathtub cleaning, like in any housework, starts with the proper supplies, as per Bond Clean Brisbane. One can run back and forth collecting forgotten things, and that is both frustrating and time-wasting. You will need baking soda, vinegar, dishwashing detergent, a spray bottle, microfiber cloths, sponges and a stiff-bristle cleaning brush. Another option is purchasing a commercial cleaner, as this kind of cleaner is specifically constructed to care for difficult stains on porcelain, enamelled, or acrylic bathtubs. The stocking process up to the maximum enables you to have a smooth cleaning season.
2. Remove Personal Accessories and Items
Clean the whole area before exposing it to any cleaning solution. Any shampoo, conditioner, bath toys, candles, razors and soap dishes should be stowed. This not only makes bathtub cleaning easier, but also ensures that no chemicals remain on objects that make direct contact with your skin. To that, add inaccessible back nooks and crannies where dirt tends to collect out of view because they are removed in the process of these accessories.
3. Wash the Bathtub Well
Since this is a tub that is now empty, rinse the tub with some warm water. This loosens surface dirt, hair and soap crystals, to make the cleaning solution work better. Consider this as a pre-washing of the canvas before painting. A soak at the beginning of the process loosens the dirt and makes it easier to clean the bathtub.
4. Use Natural Cleaning Solution
Severe chemicals are not always necessary in bathtub cleaning. Many people even prefer eco-friendly cleaning supplies because they are easy on your skin and not harmful to the planet. Mix an equal ratio of baking soda and dish soap and add a splash of vinegar. Apply this paste uniformly on top of the tub without leaving out any kind of discoloured spots. Baking soda works as a gentle scrub, dish soap is for grease and oil, and vinegar disinfects with a way tackling hard water spots. This is a versatile cleaner, which does not harm the environment, costs little, and is usually present in most kitchens.
5. Wash Properly
This is where the cross happens. Use your scrub brush or sponge and scrub in a circular motion. Take your time and clean problem areas at the back of the wall, at the bottom of the tub and around edges where gunk is most likely to get stuck. The essence of ado to bathtub cleaning is scrubbing to break up the stratum of soap scum, dirt and mineral deposits that cannot be swept away by water alone. For smaller, tougher stains, let the cleaning solution sit for 15 minutes before scrubbing it will break down the stain and save your elbows.
6. Pay Extra Attention to the Area of Drains
A place that commonly goes unnoticed when bathtub cleaning is the drain. This small area is the hotbed of hair, oils, and soaps left over; these can result in blocks and unsavoury smells. Clean the drain with a scrub and put in some mixture of vinegar and baking soda to clean the buildup in the drain. As well as being more hygienic, this also ensures that water flows properly nd mmaintainedproperly and preventing plumbing disasters later on.
7. Don’t Forget The Faucets and Handles
Faucets and handles can be overlooked because all the attention is given to the tub surface, but they should be taken care of as well. Eventually, they acquire water spots, fingerprints and mineral deposits. With a vinegar-wiped cloth, clean them, and using a microfiber towel, buff them dry. It is just a single step in taking care of a bathtub, but it can change the entire appearance of a bathroom and make it look exactly new.
8. Rinse Again to get a Clean Finish
Your tub will be so clean after rubbing and scrubbing, so it deserves one last wash. Leftover cleaning solution, dirt and loosened grime are washed away with warm water. This is essential in the step since residue left over may leave streaks or leave the surface sticky. Proper rinsing makes your bathtub cleaning effort look professional and leaves your bathtub shiny and fresh.
9. Drying and Polishing the Surface
Most of the people end up rinsing, yet drying is equally significant. Bathtub cleaning with a clean microfiber cloth to dry it. Not only does this prevent water spots, but it also minimises the possibility of gathering mould and mildew in such wet spots. To add a polish, lightly polish the surface to get that hotel touch. It takes a little additional effort, but it makes bathtub cleaning look so professional.
Conclusion
These nine steps on how bathtub cleaning should help you clean a mouldy, stained tub that makes you recoil. Some prefer the service of eco-friendly methods, and others like using commercial products, but it is important to follow through. You must not wait until the grime covers your bathtub; turn the bathtub cleaning into a regular activity, and you will be able to enjoy a professional and welcoming bathroom at any time.
